Enrique Tova Holgado

INERCO has developed the INERCO PaaS service, a new technology for the analysis and management of data received from the various monitoring systems installed in an industrial plant. This innovative service and its different applications, which are perfectly integrated in the plant’s control panel,  unifies the reception of data from

Introduction One of the main challenges to be faced by the cement sector is the compliance with environmental legislation while maximising the economic profitability of its production process from the following viewpoints: Minimisation of capital and/or operating costs linked to new gas cleaning technologies. Minimisation of penalties, or even, improvement

INERCO has successfully introduced its ABACO technology for the reduction of emissions and energy optimization in two of the thermal power plants operated by Iberdrola in Spain: those of Velilla (Palencia) and Lada (Asturias). In the case of the Palencia plant, INERCO has installed the ABACO—Flexicom technology in the plant´s

ABSTRACT The paper discusses the fundamentals and results achieved by the application of state-of-the-art technology, named ABACO, in refinery fired-heaters and boilers. The improved controls provided by this technology results in increased combustion efficiency, minimum pollutant emissions (CO2, CO, NOx, SOx, particles) and safer operation. This technology relies on the

INTRODUCTION  The coal power sector is being challenged by the current industrial and economic climate, characterized by the increasingly stringent environmental legislation and the reduction of natural gas price. Therefore, electric utilities are forced to install high-efficiency abatement technologies to comply with pollutant emission limits while paying special attention to

INTRODUCTION Complying with emissions limits imposed by the Cross-State Air Pollution Rule (CSAPR) to reduce emissions of SO2 and NOx from US power plants turns out to be one of the most important short-term challenges faced by the Thermal Power Sector. By 2014, the EPA expects that this rule will

INTRODUCTION The adequate measurement of Loss On Ignition (LOI) in pulverized coal boilers is an issue of the utmost importance for optimizing all-round boiler operation, as this parameter has direct influence on efficiency and marks the limit to establish targeted boiler tunings for NOx minimization. Additional benefits are those related